Jiangsu Acrel Electrical Manufacturing Co., Ltd.

Smart busway monitoring solution
Application

It is necessary to real-time monitor energy consumption and power quality of end load in smart track busway. Data can be uploaded to monitoring system by local touch screen through RS485 and it can realize real-time monitoring of the whole power distribution system.At the same time,it can monitor real-time temperature at the busway connector and plug-in box interface to ensure safe and reliable operation of the busway.

Structure


Main Functions

1.AMB100 or AMB110 is usually installed in the busbar start box and plug-in box

2.Measurement:AC or DC busbar voltage,current,harmonics and other parameters.

3.Realize temperature monitoring of the busbar plug interface

4.AMB200 is usually installed at the connector of the dense AC busbar,and can monitor temp. And humidity at the connector.

5.Communication:LoRa or RS485  


Product Selection

Name

Pic

Model

Main Function

HMI

1.jpg 

ATP010kt

  1. 10 inch touch screen

  2. Real-time monitoring and display    voltage,current,power,energy,power quality,switch status,wave curve,etc. of    the busbar

  3. monitoring device alarm,communication and other parameters can be    configured on the screen.

  4. 2 RS485 and 1 Ethernet,and data can uploaded by RS485 or RJ45

 

AC start box monitoring module

2.png

AMB100-A-P1

  1. Installation:DIN Rail 35mm

  2. Measurement:3 phase electrical parameters,2DI2DO,8 temp.,1 leakage    current,1 temp. and humidity

  3. Communication:1 in 1 out type RJ45 interface(Modbus protocol)

AC plug-in box monitoring module

3.png

AMB110-A-P1

  1. Installation:DIN Rail 35mm

  2. Measurement:3 phase electrical parameters,2DI2DO,4 temp.,1    leakage current,1 temp. and humidity

  3. Communication:1 in 1 out type RJ45 interface(Modbus protocol)

DC start box monitoring module

4.png

AMB100-D-P1

  1. Installation:DIN Rail 35mm

  2. Measurement:1 DC circuit electrical parameters,4DI2DO,8 temp.,1    leakage current,1 temp. and humidity

  3. ±12V output to power hall current sensor

  4. Communication:1 in 1 out type RJ45 interface(Modbus protocol)

DC plug-in box monitoring module

5.png

AMB110-D-P1

  1. Installation:DIN Rail 35mm

  2. Measurement:3 DC circuits electrical parameters,4DI2DO,4 temp.,1    leakage current,1 temp. and humidity

  3. ±12V output to power hall current sensor

  4. Communication:1 in 1 out type RJ45 interface(Modbus protocol)

AC bus connector temp. measurement device


6.png

AMB200-LR
     AMB200-C

  1. Installation: Fixed on the cover of the busbar connection

  2. Contact temp. measurement,measure and display temp. of 4 AC    busbars

  3. Communication:RS485 or LoRa

DC outgoing line hall effect current sensor

7.png

AHKC-BS

Current ratio:100A/5V
Common Specification: 100A/5V


Human Machine Interface

图片2.png图片3.png

Photos on site

11.jpg

22.png

33.png